Load monitoring device

NEW SELBER VLRM-7402 / RM-7404

<span>NEW SELBER VL</span>RM-7402 / RM-7404

Characteristics

  • ●Ideal for die height adjustment
  • ●Monitor mode: peak value / waveform monitoring functions equipped
  • ●Collects data remotely with wireless communication (Bluetooth)
  • ●Can record last 8 shots waveform data before error detection

Installation

　


※Load sensor (Strain sensor)
RS-702H

Specifications

NameNEW SELBER VL
ModelRM-7402（2ch）　/　RM-7404（4ch）
Compatible sensorRS-702H (sold separately)
range of detection1kN ~ 30000kN / 1t ~ 3000t (Switch by setting)
Monitoring methodPrevious value comparison/Reference value monitoring/Waveform comparison
Monitoring range±9999kN 1kN step (±999t 1t step) with reference value/previous value
±99% with reference waveform
Input3 points, non-voltage NPN open collector output or contact input
Timing input Non-voltage NPN or PNP open collector output or contact input
Output2 points, relay contact (C contact) NC-C-NO AC250V 2A Max. (Resistive load)
Power supply for timing signal DC12V 250mA Max.
Maximum number of rotations that can be monitored3000spm
Operating Temperature Limit0-50℃ (No Condensation)
Ambient atmosphere when usedFree from corrosive gas and dust
Power supplyAC100V-240V 50/60Hz
WeightMain Unit: Approx. 3.8kg Mounting angle: Approx. 1.7kg
External Dimensions260 (W) x 170 (H) x 136 (D) mm (excluding terminal block and other protrusions)
DisplayColor TFT LCD (7.5-inch) Number of dots Horizontal 640 x Vertical 480
Backlight life 50,000 hours (Typ.)

*The specifications and the contents described in this instruction manual are subject to change without prior notice.

Inquiry

Please wait until input screen displayed.

If input screen is not displayed, please email to sales-nara@rikenkeiki.co.jp.